TS-X12 High-Rise Fire Suppression Tethered UAV for Emergency Firefighting

High-rise building fires can create serious challenges for emergency response teams, especially when fire zones are located well above the reach of conventional ground-based firefighting equipment. Rapid access to elevated fire areas, continuous operation, accurate fire-source identification, and reliable delivery of firefighting agents are all important factors in high-altitude firefighting.

The TS-X12 High-Rise Fire Suppression Tethered UAV provides an aerial approach to high-altitude fire suppression. As an intelligent vehicle-mounted tethered UAV system, the TS-X12 combines extended hovering, large payload capacity, aerial fire-source identification, and a towed fire hose to establish an aerial firefighting agent delivery channel. The system is designed to support fire suppression for buildings over 100 meters high.

What Is the TS-X12 High-Rise Fire Suppression Tethered UAV?

The TS-X12 is an intelligent vehicle-mounted tethered UAV system based on the X12 platform. It is designed for high-altitude fire extinguishing and integrates a tethered UAV with a vehicle-mounted firefighting platform.

Unlike a conventional free-flying UAV that relies primarily on onboard batteries, the TS-X12 uses a tethered power supply. The tether provides continuous power to the aerial platform while also supporting real-time monitoring of drone parameters and system status.

The system is integrated with a National VI fire protection chassis and is designed around three important requirements for emergency firefighting: rapid response, large payload capacity, and extended hovering.

How Does the TS-X12 Reach High-Altitude Fire Zones?

One of the main challenges in high-rise firefighting is reaching elevated fire locations quickly and effectively. The TS-X12 addresses this challenge by operating as an aerial firefighting platform.

The system has a specified tethered flight altitude of 150 meters when carrying a 60 kg payload. This provides an aerial operating position for firefighting missions involving elevated fire zones.

The TS-X12 is designed to overcome some of the access limitations associated with high-rise fire areas and can support fire suppression for buildings over 100 meters high.

This capability can be particularly useful when a fire occurs at a height where conventional ground-based equipment may have difficulty reaching the affected area.

How Does Tethered Power Support Long-Duration Firefighting?

Continuous operation is another important consideration during emergency firefighting. A UAV that needs to land frequently for battery replacement may interrupt aerial observation or suppression operations.

The TS-X12 uses a tethered long-endurance power supply that enables 8 hours or more of continuous operation under the stated specifications. The system also supports real-time monitoring of drone parameters and system status.

This long-duration capability allows the UAV to remain available over an extended emergency response period rather than being limited to shorter operating cycles.

How Does the TS-X12 Deliver Firefighting Agents?

The TS-X12 is equipped with a towed fire hose, creating an aerial delivery channel for firefighting agents.

A specialized spray gun and an ultra-lightweight fire hose work together with the UAV platform to support targeted fire suppression. By carrying the firefighting equipment into an elevated operating position, the system can direct firefighting agents toward the identified fire source.

This configuration is particularly relevant to high-rise applications, where the UAV provides aerial positioning while the tethered firefighting equipment supports continuous agent delivery.

How Does the UAV Identify Fire Sources?

Accurate fire-source identification is important during aerial firefighting operations. The TS-X12 is equipped with a high-definition triple-optical gimbal and an intelligent AI processor.

These components support fire-source identification and aerial observation. Once the fire area is identified, the UAV's firefighting equipment can be used for targeted suppression.

By combining aerial observation with firefighting equipment, the TS-X12 can integrate fire-source identification and aerial suppression rather than functioning only as an observation drone.

What Payload Capacity Does the TS-X12 Provide?

The TS-X12 has a maximum payload capacity of 60 kg.

A substantial payload capacity is important for a firefighting UAV because the aircraft needs to carry mission-specific equipment while maintaining stable flight. In the TS-X12 configuration, the payload capability supports the integration of firefighting equipment such as the spray gun and lightweight fire hose.

The specified tethered flight altitude is 150 m at a 60 kg payload, showing the platform's ability to combine high-altitude operation with substantial payload capability.

How Does the TS-X12 Support Rapid Emergency Deployment?

Firefighting operations are highly time-sensitive. The sooner an aerial platform becomes operational, the sooner it can provide observation and suppression support.

The TS-X12 has a stated deployment time of approximately 3 minutes. Its vehicle-mounted configuration allows the system to be transported as an integrated firefighting platform and deployed quickly when needed.

This rapid-deployment design makes the TS-X12 suitable for emergency firefighting scenarios where response time is an important consideration.

How Does the TS-X12 Improve Operational Safety?

Operating a heavy-payload UAV at high altitude requires attention to system reliability and fault response. The TS-X12 incorporates several safety and monitoring features.

The system includes tethered power-status monitoring and propulsion-system diagnostics. Its six-axis, twelve-rotor configuration provides power redundancy, while the system includes protection functions for single-propeller failure, automatic power-off landing, and landing protocols in the event of communication loss.

These functions are designed to support the reliability of the aerial platform during demanding emergency operations.

What Other Tasks Can the TS-X12 Perform?

Although high-rise fire suppression is a primary application, the TS-X12 is designed for multiple aerial emergency tasks.

The platform can perform tasks including:

• Window breaching

• Fire suppression

• Reconnaissance

The TS-X12 can also support emergency communications and chemical-industry firefighting. This gives the system the flexibility to support different types of emergency response missions.

Key Specifications of the TS-X12

Specification	TS-X12
Maximum Payload Capacity	60 kg
Tethered Flight Altitude	150 m @ 60 kg
Tethered Flight Time	≥8 hours
Maximum Operating Altitude	5000 m
Deployment Time	3 minutes
Wind Resistance	Level 6
Power Supply Voltage	380 VAC
Positioning Mode	Single-point / Fixed Base Station RTK
Rainproof Performance	Moderate rain
Configuration	Six-axis, twelve-rotor

These specifications highlight the TS-X12's combination of high-altitude access, payload capacity, long-duration operation, and rapid deployment for emergency applications.

TS-X12 for High-Rise Fire Suppression

The TS-X12 brings together several capabilities designed to address common challenges in high-altitude firefighting.

High-altitude access allows the UAV to operate at up to 150 meters under the specified 60 kg payload condition.

Long-duration operation is supported by the tethered power system, with a stated operating time of 8 hours or more.

Large payload capacity allows the platform to carry firefighting equipment, with a maximum payload of 60 kg.

Fire-source identification is supported by the high-definition triple-optical gimbal and AI processor.

Aerial fire suppression is enabled through the specialized spray gun and lightweight fire hose.

Rapid deployment allows the vehicle-mounted system to be deployed in approximately 3 minutes.

Together, these capabilities provide an aerial firefighting option for high-rise buildings and other emergency environments where reaching elevated fire zones can be challenging.

http://www.droneyee-tech.com
Beijing Zhuoyi Intelligent Technology Co., Ltd.